Firmware 30

DVL-2483

What does this firmware do?

General improvement of the software stability.

Update instructions:

1) unpack the files and copy files safe-kernel and update-demo to root of an empty USB drive

2) disconnect mains from TV

3) attach USB drive to TV

4) connect mains to TV

5) blue LED starts flashing slowly

6) after ~60 seconds the blue LED flases quickly, that means: upgrade ready

7) disconnect mains and remove USB drive

8) reconnect mains and start the TV

Attention: do NOT REMOVE USB device when system is updating. This causes errors or defects to the TV

Updating firmware is at own risc.

Firmware download link:

http://www.lenco.eu/supportfiles/Firmware/FW_DVL-2483.zip

DVL-2483

What does this firmware do?
In rare cases, it is possible that the channel list will be lost when the TV is restarted. This firmware update will help to fix this bug.

Firmware update instructions:
1) Download the firmware.
2) Unpack the files on an empty USB drive.
3) Disconnect the TV’s power cord from the AC outlet.
4) Insert the USB drive into the TV.
5) Connect the TV’s power cord to the AC outlet.
6) The blue LED indicator will flash slowly.
7) After about 60 seconds, the blue LED will start to flash quickly. This indicates: update ready.
8) Disconnect the power cord from the AC outlet and remove the USB drive.
9) Reconnect the power cord and start the TV.

Firmware download link:
http://www.lenco.eu/supportfiles/Firmware/FW_DVL-2483.rar

DVL-2493

Improvements:

Improvement of the DVB-C Tuner

Procedures of the update process : 

1. Copy the firmware file to a FAT32 formated USB-Stick

2. Switch on the TV and choose source DTV

3. Plug the USB-Stick into the TV

4. Choose  Software-Update(USB)  in  menu and execute it

5. If the Softwareupdate is finished, the TV goes off, wait 1 minute

6. Switch off the mainswitch, remove the USB-Stick, wait 1 minute

7. Switch on the mainswitch, start TV

8. In settings menu choose “Restore Factory Default”

Download link:

http://www.lenco.eu/supportfiles/Firmware/CV306_TL_M236_308LA20_CP131_CKJH111272.bin

DVL-2690

Improvements:

hanging error in DVB-C Modus is solved

Procedures of the update process : 

1. Copy the firmware file to a FAT32 formated USB-Stick

2. Switch on the TV and choose source DTV

3. Plug the USB-Stick into the TV

4. Choose  Software-Update(USB)  in  menu and execute it

5. If the Softwareupdate is finished, the TV goes off, wait 1 minute

6. Switch off the mainswitch, remove the USB-Stick, wait 1 minute

7. Switch on the mainswitch, start TV

8. In settings menu choose “Restore Factory Default”

Download link:

http://www.lenco.eu/supportfiles/Firmware/CV306_TL_TC260_308HA30_CS141_CKJH111275_B1.2.36.rar

DVP-731

Improvement:

Solves subtitle problem

Procedure:

1. Extract the .rar file and copy it onto a FAT32 formated USB storage device

2. Turn on the device

3. Insert the USB storage device

4. Switch to USB mode and follow the instructions on the screen

Download link:

http://www.lenco.eu/supportfiles/Firmware/build.img

DVP-732

Download link:

http://www.lenco.eu/supportfiles/Firmware/DVP-732.rar

improvements :
Fixed bug in the subtitle selection and the audio track
How to update :

  1. Extract the .rar file and copy the two files to a FAT32 formatted   USB stick
  2. Turn on the unit
  3. Connect the  USB Stick to the DVD player
  4. Set your player to USB mode and follow the instructions on the screen.

 


Notes:

Firmware update at your own risk !
Do not remove the stick during the update , as this could lead to crashes and damage to the unit , in case of repair , the warranty expires .

DVP-936

This firmware increases the maximum volume level.

 

How to update:

  1. Download the file
  2. Copy it onto a FAT32 formatted USB device
  3. Connect the USB device to the DVD player
  4. Select USB source
  5. Confirm and the DVD player will start to update.

Firmware updates are at your own risk

Firmware download link:

http://www.lenco.eu/supportfiles/Firmware/MTK.BIN

L-81 USB

Take note that our USB turntable models do not work with Windows versions older than Windows XP or with Windows 7 Starter

Download the Audacity USB turntable software for

Windows XP:
http://www.lenco.eu/supportfiles/Firmware/FW_audacity-win-1.2.6

Windows Vista & Windows 7:
http://www.lenco.eu/supportfiles/Firmware/FW_audacity-win-unicode-1…

MAC OS X 10.0 to 10.3 (Intel):
http://www.lenco.eu/supportfiles/Firmware/FW_audacity-macosx-intel-…

MAC OS X 10.0 to 10.3 (PPC):
http://www.lenco.eu/supportfiles/Firmware/FW_audacity-macosx-ppc-1….

MAC OS X 10.4 or later:
http://www.lenco.eu/supportfiles/Firmware/FW_audacity-macosx-ub-1.3.14

Linux / Unix:
http://audacity.sourceforge.net/download/linux

For information, support and updates please visit the Audacity website:
http://audacity.sourceforge.net/

L-81 USB

What does this update do?
Your L-81 accepts now memory devices formatted in FAT32 and SDHC cards. (Max. 16GB)

Upgrade instructions:
1)    format a USB stick not bigger than 2GB in FAT
2)    unzip the file on your PC
3)    copy the unzipped files directly to you USB device
4)    connect the USB stick to your L-81 and switch on
5)    select USB with button AUDIO SELECT and wait minimum 60 seconds
6)    upgrade is finished, switch L-81 off and disconnect USB stick.

Firmware download link:
http://www.lenco.eu/supportfiles/Firmware/FW_L-81.rar

LED-2213

Download link:

http://www.lenco.eu/supportfiles/Firmware/wholeflashv132_20120502MK.ssu

Improvements:

1. Improvement in radio mode

2. up to date channel list.

Update instructions:

1. Copy firmware „wholeflashv132_20120502MK.ssu“ to a FAT32 formated USB Stick.

2. Switch on TV and select DVB-S mode.

3. Press USB button on remote control and the DVB-S menu opens.

4. Choose update, then „DEV-UPDATE“ . Confirm with OK. The firmware with update will be installed now.

When update is ready, the TV automatically shuts off and on again..

 

Attention: do NOT REMOVE USB device when system is updating. This causes errors or defects to the TV

Updating firmware is at own risc.

LED-2214

Download link:

http://www.lenco.eu/supportfiles/Firmware/wholeflashv132_20120502MK.ssu

Improvements:

1. Improvement in radio mode

2. up to date channel list.

Update instructions:

1. Copy firmware „wholeflashv132_20120502MK.ssu“ to a FAT32 formated USB Stick.

2. Switch on TV and select DVB-S mode.

3. Press USB button on remote control and the DVB-S menu opens.

4. Choose update, then „DEV-UPDATE“ . Confirm with OK. The firmware with update will be installed now.

When update is ready, the TV automatically shuts off and on again..

 

Attention: do NOT REMOVE USB device when system is updating. This causes errors or defects to the TV

Updating firmware is at own risc.

LED-2215

Download link:

http://www.lenco.eu/supportfiles/Firmware/wholeflashv132_20120502MK.ssu

Improvements:

1. Improvement in radio mode

2. up to date channel list.

Update instructions:

1. Copy firmware „wholeflashv132_20120502MK.ssu“ to a FAT32 formated USB Stick.

2. Switch on TV and select DVB-S mode.

3. Press USB button on remote control and the DVB-S menu opens.

4. Choose update, then „DEV-UPDATE“ . Confirm with OK. The firmware with update will be installed now.

When update is ready, the TV automatically shuts off and on again..

 

Attention: do NOT REMOVE USB device when system is updating. This causes errors or defects to the TV

Updating firmware is at own risc.

LED-2215

What does this software update do?
This software update will improve the DVB-S function.

Software installation instructions:
1. Format in FAT32 a USB storage device.
2. Copy the downloaded and unpacked data onto the USB storage device.
3. Turn on the TV and swtich it in DVBS mode.
4. Connect the USB storage device and wait for several seconds.
5. Select in the main menu “system settings” and then System-update.
6. Confirm by pressing okay
7. Select by pressing okay the file v126appdb.ssu and press okay again to install the software.
8. The unit will now reboot.
9. Open the menu and select in the menu “system settings” the option “preferences” and reset with okay. The pin code is 0000. Press okay again.

Download link:
http://www.lenco.eu/supportfiles/Firmware/FW_LED-2215.rar

LED-2217

How to update :

  1. Extract the files
  2. Copy the . Bin file onto a FAT32 formatted USB stick
  3. Switch on the device and select the DVB-S mode
  4. Connect the USB Stick to the TV
  5. Select Software Update ( USB ) in the menu and select Run
  6. A fter the update the TV turns off , wait 1 minute
  7. Turn off the power switch, remove USB stick , wait 1 minute
  8. Power switch on again , TV launches in initial installation
  9. DVB Type > Satellite and Tune Type > Choose ( ONLY ) DTV
  10. Now a pre-sorted programs list can be loaded ( RECOMMENDED)

Download link:

http://www.lenco.eu/supportfiles/Firmware/LED-2217.rar

Sportcam-600

http://www.lenco.eu/supportfiles/Firmware/Sportcam-600_Carmode_EN.doc

http://www.lenco.eu/supportfiles/Firmware/Sportcam-600_firmware.rar

 

Below instruction for renew the firmware:

(1) Format your SD card

(2) Download new firmware, extract the .rar file and save the two files at the SD card.

(3) Insert SD card into the camera.

(4) Last the camera will automatic update firmware when you power on.

(5) Please don’t power off when updating.

(6) After updating finished, Please delete firmware before you use the camera.

After update Sportcam-600 has Carmode feature.